Vinyl Siding Contractors Based in Placerville
Choosing vinyl siding in Placerville means weighing local wind and hail exposure against a panel's ASTM rating, not just its color. 3 vinyl siding installers with a Placerville address are listed further down the page.
Licenses checked · California Contractors State License Board
46° / 77°Fnormal January and July mean temperatures
What Placerville's climate asks of a vinyl panel
Placerville logs 3,176 heating degree days most winters, plus 1,300 on the cooling side come summer, a two-sided load exterior cladding has to shrug off.
Cold Placerville winters make vinyl more brittle to handle and fasten correctly; hot summers are when reflected-heat distortion tends to show up instead.
Data: NOAA National Centers for Environmental Information, U.S. Climate Normals 1991-2020 (annual/seasonal and monthly, by station) (1991-2020), from the nearest NOAA station 2.8 mi away.
Wind and hail risk near Placerville
El Dorado County carries a Very Low hail rating and a Relatively Low wind rating on FEMA's National Risk Index.
Around Placerville, hail typically dents vinyl before it cracks it; wind tests the fastening pattern and the panel's locking design more than the raw material.
- Strong wind
- Relatively Low
- Hail
- Very Low
- Wildfire
- Relatively High
Data: FEMA, National Risk Index for Natural Hazards - County-level table, v1.20 (v1.20, December 2025).
Vinyl siding installers based in Placerville
Sorted A to Z by business name.
Adm General Construction
Siding contractor
- License
- B General Building / C-61/D-41 Siding and Decking · 873910
- Since
- 2006
- Expires
- Nov 30, 2027
- ZIP
- 95684
Alpine Builders
Siding contractor
- License
- B General Building / C-17 Glazing / C-61/D-41 Siding and Decking · 1051795
- Since
- 2019
- Expires
- Mar 31, 2027
- ZIP
- 95667
Alpine Exteriors
Siding contractor
- License
- B General Building / C-17 Glazing / C-61/D-41 Siding and Decking · 806191
- Since
- 2002
- Expires
- Apr 30, 2028
- ZIP
- 95667
Before you sign, ask about the panel itself
- What thickness, in mils, is this panel, and does it carry an independent ASTM D3679 certification listing?
- Is this standard vinyl or insulated vinyl, and if insulated, what R-value is certified under ASTM D7793?
- What wind-load rating is the product certified for, in miles per hour, and how does that compare to {county}'s wind risk?
- Will the installer leave the manufacturer's specified expansion gap at trim, corners and openings, or nail tight?
- If the color is a dark shade, is it separately certified for color retention?
- Does any wall face reflected sunlight from a neighboring low-E window, and has that been accounted for in the material choice?