Vinyl Siding Contractors Based in Fair Oaks
This page pairs Fair Oaks's climate and risk profile with 3 vinyl siding installers based here, so you can match a panel spec to conditions before calling anyone.
Licenses checked · California Contractors State License Board
Wind and hail risk near Fair Oaks
On FEMA's National Risk Index, wind risk in Sacramento County is Very Low and hail risk is Relatively Low.
Both are exactly the two stresses vinyl siding sold near Fair Oaks is tested against before a product can carry ASTM certification.
A Very Low wind rating is one more reason to ask what wind-load class your installer is actually specifying.
- Strong wind
- Very Low
- Hail
- Relatively Low
- Wildfire
- Relatively Moderate
Data: FEMA, National Risk Index for Natural Hazards - County-level table, v1.20 (v1.20, December 2025).
Vinyl siding installers based in Fair Oaks
Sorted A to Z by business name.
American Dream Siding & Decking INC
Siding contractor
- License
- B General Building / C-61/D-41 Siding and Decking · 1027141
- Since
- 2017
- Expires
- Apr 30, 2027
- ZIP
- 95628
Nespa Exteriors INC
Siding contractor
- License
- C-61/D-41 Siding and Decking · 1159317
- Since
- 2026
- Expires
- Aug 31, 2028
- ZIP
- 95628
RLS Construction
Siding contractor
- License
- B General Building / C-17 Glazing / C-39 Roofing / C-54 Tile / C-61/D-41 Siding and Decking · 936098
- Since
- 2009
- Expires
- Aug 31, 2027
- ZIP
- 95628
Before you sign, ask about the panel itself
- What thickness, in mils, is this panel, and does it carry an independent ASTM D3679 certification listing?
- Is this standard vinyl or insulated vinyl, and if insulated, what R-value is certified under ASTM D7793?
- What wind-load rating is the product certified for, in miles per hour, and how does that compare to {county}'s wind risk?
- Will the installer leave the manufacturer's specified expansion gap at trim, corners and openings, or nail tight?
- If the color is a dark shade, is it separately certified for color retention?
- Does any wall face reflected sunlight from a neighboring low-E window, and has that been accounted for in the material choice?