Rancho Cordova Vinyl Siding Pros
Rancho Cordova, CA sits in a spot where Very Low wind risk and Relatively Low hail risk both matter to which vinyl panel makes sense. Below that context, 3 vinyl siding installers based in Rancho Cordova are listed by name.
Licenses checked · California Contractors State License Board
Storm ratings on file for Sacramento County
Sacramento County carries a Relatively Low hail rating and a Very Low wind rating on FEMA's National Risk Index.
Around Rancho Cordova, hail typically dents vinyl before it cracks it; wind tests the fastening pattern and the panel's locking design more than the raw material.
- Strong wind
- Very Low
- Hail
- Relatively Low
- Wildfire
- Relatively Moderate
Data: FEMA, National Risk Index for Natural Hazards - County-level table, v1.20 (v1.20, December 2025).
3 vinyl siding installers based in Rancho Cordova, CA
Sorted A to Z by business name.
D M R Construction
Siding contractor
- License
- B General Building / C-61/D-41 Siding and Decking · 982893
- Since
- 2013
- Expires
- Apr 30, 2027
- ZIP
- 95742
Northwest Exteriors INC
Siding contractor
- License
- B General Building / C-17 Glazing / C-61/D-41 Siding and Decking · 710798
- Since
- 1995
- Expires
- Mar 31, 2028
- ZIP
- 95670
Quality Built Roofing
Siding contractor
- License
- C-39 Roofing / C-61/D-41 Siding and Decking · 1045534
- Since
- 2018
- Expires
- Oct 31, 2026
- ZIP
- 95670
Before you sign, ask about the panel itself
- What thickness, in mils, is this panel, and does it carry an independent ASTM D3679 certification listing?
- Is this standard vinyl or insulated vinyl, and if insulated, what R-value is certified under ASTM D7793?
- What wind-load rating is the product certified for, in miles per hour, and how does that compare to {county}'s wind risk?
- Will the installer leave the manufacturer's specified expansion gap at trim, corners and openings, or nail tight?
- If the color is a dark shade, is it separately certified for color retention?
- Does any wall face reflected sunlight from a neighboring low-E window, and has that been accounted for in the material choice?