Vinyl Siding Installers in Marysville, CA
Marysville, CA sits in a spot where Very Low wind risk and Very Low hail risk both matter to which vinyl panel makes sense. Below that context, 3 vinyl siding installers based in Marysville are listed by name.
Licenses checked · California Contractors State License Board
49° / 81°Fnormal January and July mean temperatures
Temperature swings in Marysville
Marysville logs 2,125 heating degree days most winters, plus 1,917 on the cooling side come summer, a two-sided load exterior cladding has to shrug off.
Cold Marysville winters make vinyl more brittle to handle and fasten correctly; hot summers are when reflected-heat distortion tends to show up instead.
Data: NOAA National Centers for Environmental Information, U.S. Climate Normals 1991-2020 (annual/seasonal and monthly, by station) (1991-2020), from the nearest NOAA station 0.4 mi away.
Storm ratings on file for Yuba County
Yuba County carries a Very Low hail rating and a Very Low wind rating on FEMA's National Risk Index.
Around Marysville, hail typically dents vinyl before it cracks it; wind tests the fastening pattern and the panel's locking design more than the raw material.
- Strong wind
- Very Low
- Hail
- Very Low
- Wildfire
- Relatively Moderate
Data: FEMA, National Risk Index for Natural Hazards - County-level table, v1.20 (v1.20, December 2025).
3 vinyl siding installers based in Marysville, CA
Sorted A to Z by business name.
Ceba Siding & Decking INC
Siding contractor
- License
- C-61/D-41 Siding and Decking · 1138807
- Since
- 2025
- Expires
- Jun 30, 2027
- ZIP
- 95901
Meta Siding
Siding contractor
- License
- C-61/D-41 Siding and Decking · 1134049
- Since
- 2025
- Expires
- Mar 31, 2027
- ZIP
- 95901
Nor-Cal Siders
Siding contractor
- License
- B General Building / C-61/D-41 Siding and Decking · 1092647
- Since
- 2022
- Expires
- Jun 30, 2028
- ZIP
- 95901
Before you sign, ask about the panel itself
- What thickness, in mils, is this panel, and does it carry an independent ASTM D3679 certification listing?
- Is this standard vinyl or insulated vinyl, and if insulated, what R-value is certified under ASTM D7793?
- What wind-load rating is the product certified for, in miles per hour, and how does that compare to {county}'s wind risk?
- Will the installer leave the manufacturer's specified expansion gap at trim, corners and openings, or nail tight?
- If the color is a dark shade, is it separately certified for color retention?
- Does any wall face reflected sunlight from a neighboring low-E window, and has that been accounted for in the material choice?