Vinyl Siding Contractors Based in Rio Linda

Rio Linda, CA sits in a spot where Very Low wind risk and Relatively Low hail risk both matter to which vinyl panel makes sense. Below that context, 3 vinyl siding installers based in Rio Linda are listed by name.

Licenses checked · California Contractors State License Board

47° / 76°Fnormal January and July mean temperatures

What Rio Linda's climate asks of a vinyl panel

Rio Linda logs 2,644 heating degree days most winters, plus 1,279 on the cooling side come summer, a two-sided load exterior cladding has to shrug off.

Cold Rio Linda winters make vinyl more brittle to handle and fasten correctly; hot summers are when reflected-heat distortion tends to show up instead.

Data: NOAA National Centers for Environmental Information, U.S. Climate Normals 1991-2020 (annual/seasonal and monthly, by station) (1991-2020), from the nearest NOAA station 8 mi away.

Wind and hail risk near Rio Linda

Sacramento County carries a Relatively Low hail rating and a Very Low wind rating on FEMA's National Risk Index.

Around Rio Linda, hail typically dents vinyl before it cracks it; wind tests the fastening pattern and the panel's locking design more than the raw material.

Strong wind
Very Low
Hail
Relatively Low
Wildfire
Relatively Moderate

Data: FEMA, National Risk Index for Natural Hazards - County-level table, v1.20 (v1.20, December 2025).

Vinyl siding installers based in Rio Linda

Sorted A to Z by business name.

  • Garcia Siding & Decking INC

    Siding contractor

    License
    C-61/D-41 Siding and Decking · 1129084
    Since
    2024
    Expires
    Nov 30, 2026
    ZIP
    95763
    Verify license
  • K G Scow Improvements

    Siding contractor

    License
    C-61/D-41 Siding and Decking · 763843
    Since
    1999
    Expires
    Jun 30, 2027
    ZIP
    95673
    Verify license
  • Pasquett Roofing INC

    Siding contractor

    License
    C-39 Roofing / C-61/D-41 Siding and Decking · 1010631
    Since
    2016
    Expires
    May 31, 2028
    ZIP
    95673
    Verify license

Before you sign, ask about the panel itself

  1. What thickness, in mils, is this panel, and does it carry an independent ASTM D3679 certification listing?
  2. Is this standard vinyl or insulated vinyl, and if insulated, what R-value is certified under ASTM D7793?
  3. What wind-load rating is the product certified for, in miles per hour, and how does that compare to {county}'s wind risk?
  4. Will the installer leave the manufacturer's specified expansion gap at trim, corners and openings, or nail tight?
  5. If the color is a dark shade, is it separately certified for color retention?
  6. Does any wall face reflected sunlight from a neighboring low-E window, and has that been accounted for in the material choice?

More on California →

Other California cities with vinyl siding pros

All cities in California →