Lincoln Vinyl Siding Pros
Choosing vinyl siding in Lincoln means weighing local wind and hail exposure against a panel's ASTM rating, not just its color. 3 vinyl siding installers with a Lincoln address are listed further down the page.
Licenses checked · California Contractors State License Board
47° / 78°Fnormal January and July mean temperatures
What Lincoln's climate asks of a vinyl panel
Lincoln's July mean of 78°F is well below what a dark vinyl panel can reach in direct sun, which is part of why manufacturers warn about nearby heat sources.
January's 47°F mean, on the other end, is cold enough that a crew has to widen fastening clearances to keep panels from cracking.
Data: NOAA National Centers for Environmental Information, U.S. Climate Normals 1991-2020 (annual/seasonal and monthly, by station) (1991-2020), from the nearest NOAA station 12 mi away.
Wind and hail risk near Lincoln
Placer County carries a Very Low hail rating and a Relatively Low wind rating on FEMA's National Risk Index.
Around Lincoln, hail typically dents vinyl before it cracks it; wind tests the fastening pattern and the panel's locking design more than the raw material.
- Strong wind
- Relatively Low
- Hail
- Very Low
- Wildfire
- Relatively High
Data: FEMA, National Risk Index for Natural Hazards - County-level table, v1.20 (v1.20, December 2025).
Vinyl siding installers based in Lincoln
Sorted A to Z by business name.
Dom Construction INC
Siding contractor
- License
- B General Building / C-61/D-41 Siding and Decking · 1076811
- Since
- 2021
- Expires
- Jun 30, 2027
- ZIP
- 95648
R P S Remodeling INC
Siding contractor
- License
- B General Building / C-61/D-41 Siding and Decking · 404368
- Since
- 1981
- Expires
- Aug 31, 2027
- ZIP
- 95648
Red Line Specialty Siding
Siding contractor
- License
- C-61/D-41 Siding and Decking · 1158171
- Since
- 2026
- Expires
- Jul 31, 2028
- ZIP
- 95648
Before you sign, ask about the panel itself
- What thickness, in mils, is this panel, and does it carry an independent ASTM D3679 certification listing?
- Is this standard vinyl or insulated vinyl, and if insulated, what R-value is certified under ASTM D7793?
- What wind-load rating is the product certified for, in miles per hour, and how does that compare to {county}'s wind risk?
- Will the installer leave the manufacturer's specified expansion gap at trim, corners and openings, or nail tight?
- If the color is a dark shade, is it separately certified for color retention?
- Does any wall face reflected sunlight from a neighboring low-E window, and has that been accounted for in the material choice?