Maple Valley Vinyl Siding Pros
This page pairs Maple Valley's climate and risk profile with 3 vinyl siding installers based here, so you can match a panel spec to conditions before calling anyone.
Licenses checked · Washington State Department of Labor & Industries
39° / 64°Fnormal January and July mean temperatures
What Maple Valley's climate asks of a vinyl panel
Maple Valley's July mean of 64°F is well below what a dark vinyl panel can reach in direct sun, which is part of why manufacturers warn about nearby heat sources.
January's 39°F mean, on the other end, is cold enough that a crew has to widen fastening clearances to keep panels from cracking.
Data: NOAA National Centers for Environmental Information, U.S. Climate Normals 1991-2020 (annual/seasonal and monthly, by station) (1991-2020), from the nearest NOAA station 3.5 mi away.
Wind and hail risk near Maple Valley
King County carries a Very Low hail rating and a Very Low wind rating on FEMA's National Risk Index.
Around Maple Valley, hail typically dents vinyl before it cracks it; wind tests the fastening pattern and the panel's locking design more than the raw material.
- Strong wind
- Very Low
- Hail
- Very Low
- Wildfire
- Relatively Low
Data: FEMA, National Risk Index for Natural Hazards - County-level table, v1.20 (v1.20, December 2025).
Vinyl siding installers based in Maple Valley
Sorted A to Z by business name.
Ava Siding LLC
Siding contractor
- License
- General · AVASISL951NC
- Since
- 2005
- Expires
- Aug 2, 2027
- ZIP
- 98038
MV Construction INC
Siding contractor
- License
- Siding · MVCONCI843JA
- Since
- 2016
- Expires
- Apr 1, 2028
- ZIP
- 98038
RL Painting & Siding LLC
Siding contractor
- License
- General · RLPAIPS842DM
- Since
- 2016
- Expires
- Jul 1, 2028
- ZIP
- 98038
Before you sign, ask about the panel itself
- What thickness, in mils, is this panel, and does it carry an independent ASTM D3679 certification listing?
- Is this standard vinyl or insulated vinyl, and if insulated, what R-value is certified under ASTM D7793?
- What wind-load rating is the product certified for, in miles per hour, and how does that compare to {county}'s wind risk?
- Will the installer leave the manufacturer's specified expansion gap at trim, corners and openings, or nail tight?
- If the color is a dark shade, is it separately certified for color retention?
- Does any wall face reflected sunlight from a neighboring low-E window, and has that been accounted for in the material choice?