Vinyl Siding Contractors Based in Sherwood
This page pairs Sherwood's climate and risk profile with 3 vinyl siding installers based here, so you can match a panel spec to conditions before calling anyone.
Licenses checked · Oregon Construction Contractors Board
40° / 68°Fnormal January and July mean temperatures
Temperature swings in Sherwood
Sherwood's July mean of 68°F is well below what a dark vinyl panel can reach in direct sun, which is part of why manufacturers warn about nearby heat sources.
January's 40°F mean, on the other end, is cold enough that a crew has to widen fastening clearances to keep panels from cracking.
Data: NOAA National Centers for Environmental Information, U.S. Climate Normals 1991-2020 (annual/seasonal and monthly, by station) (1991-2020), from the nearest NOAA station 5.2 mi away.
Storm ratings on file for Washington County
Wind risk in Washington County rates Relatively Moderate and hail rates Very Low, per FEMA's county-level data.
Neither rating changes what's inside a box of siding sold in Sherwood, but both are good reason to ask for a panel's actual wind-load certification rather than trusting the sample board alone.
- Strong wind
- Relatively Moderate
- Hail
- Very Low
- Wildfire
- Very Low
Data: FEMA, National Risk Index for Natural Hazards - County-level table, v1.20 (v1.20, December 2025).
3 vinyl siding installers based in Sherwood, OR
Sorted A to Z by business name.
Chehalem Siding And Construction LLC
Siding contractor
- License
- Residential General Contractor · 227922
- Since
- 2019
- Expires
- Sep 10, 2027
- ZIP
- 97140
Sherwood Siding & Construction LLC
Siding contractor
- License
- Residential General Contractor · 168433
- Since
- 2006
- Expires
- Feb 13, 2028
- ZIP
- 97140
Walter Siding LLC
Siding contractor
- License
- Residential Specialty Contractor · 258038
- Since
- 2025
- Expires
- Aug 25, 2027
- ZIP
- 97140
Before you sign, ask about the panel itself
- What thickness, in mils, is this panel, and does it carry an independent ASTM D3679 certification listing?
- Is this standard vinyl or insulated vinyl, and if insulated, what R-value is certified under ASTM D7793?
- What wind-load rating is the product certified for, in miles per hour, and how does that compare to {county}'s wind risk?
- Will the installer leave the manufacturer's specified expansion gap at trim, corners and openings, or nail tight?
- If the color is a dark shade, is it separately certified for color retention?
- Does any wall face reflected sunlight from a neighboring low-E window, and has that been accounted for in the material choice?