Vinyl Siding Installers in Spring Creek, NV
This page pairs Spring Creek's climate and risk profile with 3 vinyl siding installers based here, so you can match a panel spec to conditions before calling anyone.
Licenses checked · Nevada State Contractors Board
26° / 68°Fnormal January and July mean temperatures
Temperature swings in Spring Creek
Spring Creek's July mean of 68°F is well below what a dark vinyl panel can reach in direct sun, which is part of why manufacturers warn about nearby heat sources.
January's 26°F mean, on the other end, is cold enough that a crew has to widen fastening clearances to keep panels from cracking.
Data: NOAA National Centers for Environmental Information, U.S. Climate Normals 1991-2020 (annual/seasonal and monthly, by station) (1991-2020), from the nearest NOAA station 4.3 mi away.
Storm ratings on file for Elko County
On FEMA's National Risk Index, wind risk in Elko County is Relatively Low and hail risk is Very Low.
Both are exactly the two stresses vinyl siding sold near Spring Creek is tested against before a product can carry ASTM certification.
A Relatively Low wind rating is one more reason to ask what wind-load class your installer is actually specifying.
- Strong wind
- Relatively Low
- Hail
- Very Low
- Wildfire
- Relatively High
Data: FEMA, National Risk Index for Natural Hazards - County-level table, v1.20 (v1.20, December 2025).
3 vinyl siding installers based in Spring Creek, NV
Sorted A to Z by business name.
B 3 Glass LLC
Siding contractor
- License
- C-15B Siding · 0082491
- Since
- Not listed
- Expires
- Jun 30, 2027
- ZIP
- 89815
D & S Done Superior LLC
Siding contractor
- License
- C-15 Roofing and Siding · 0094999
- Since
- Not listed
- Expires
- Feb 28, 2028
- ZIP
- 89815
Wetmore Construction
Siding contractor
- License
- C-15 Roofing and Siding · 0082733
- Since
- Not listed
- Expires
- Aug 31, 2027
- ZIP
- 89815
Before you sign, ask about the panel itself
- What thickness, in mils, is this panel, and does it carry an independent ASTM D3679 certification listing?
- Is this standard vinyl or insulated vinyl, and if insulated, what R-value is certified under ASTM D7793?
- What wind-load rating is the product certified for, in miles per hour, and how does that compare to {county}'s wind risk?
- Will the installer leave the manufacturer's specified expansion gap at trim, corners and openings, or nail tight?
- If the color is a dark shade, is it separately certified for color retention?
- Does any wall face reflected sunlight from a neighboring low-E window, and has that been accounted for in the material choice?