Vernon's Highest-Rated Vinyl Siding Pros, by Google
5 vinyl siding installers earned a spot on this Vernon page by Google rating, not by a state file this site doesn't have enough of yet. Wind risk reads Very High and hail risk reads Very Low for the county around Vernon, exactly the two stresses a panel's ASTM rating is supposed to answer.
Google Maps ratings checked · How we rank
Storm ratings on file for Sussex County
Wind risk in Sussex County rates Very High and hail rates Very Low, per FEMA's county-level data.
Neither rating changes what's inside a box of siding sold in Vernon, but both are good reason to ask for a panel's actual wind-load certification rather than trusting the sample board alone.
- Strong wind
- Very High
- Hail
- Very Low
- Hurricane
- Relatively Low
- Wildfire
- Very Low
Data: FEMA, National Risk Index for Natural Hazards - County-level table, v1.20 (v1.20, December 2025).
Vinyl siding installers near Vernon, by Google rating
A single five-star review counts for less here than a few hundred reviews averaging 4.8, since the order below blends the star count with how many people left one. Nothing about that order checks a license, so ask to see one yourself before you sign.
Simpson Roofing Co
Siding contractor
- Google rating
- Reviews
- 26
- Area
- Vernon Township 07462
Riedel Contracting Inc
Siding contractor
- Google rating
- Reviews
- 20
- Area
- Warwick 10990
Above it All Roofing LLC serving Sussex County New Jersey
Siding contractor
- Google rating
- Reviews
- 11
- Area
- Hamburg 07419
Tom Madsen LLC
Siding contractor
- Google rating
- Reviews
- 28
- Area
- Not listed
Storm Guard Roofing, LLC
Siding contractor
- Google rating
- Reviews
- 16
- Area
- Sussex 07461
Before you sign, ask about the panel itself
- What thickness, in mils, is this panel, and does it carry an independent ASTM D3679 certification listing?
- Is this standard vinyl or insulated vinyl, and if insulated, what R-value is certified under ASTM D7793?
- What wind-load rating is the product certified for, in miles per hour, and how does that compare to {county}'s wind risk?
- Will the installer leave the manufacturer's specified expansion gap at trim, corners and openings, or nail tight?
- If the color is a dark shade, is it separately certified for color retention?
- Does any wall face reflected sunlight from a neighboring low-E window, and has that been accounted for in the material choice?