Top-Rated Vinyl Siding Installers in St. John, IN
5 vinyl siding installers earned a spot on this St. John page by Google rating, not by a state file this site doesn't have enough of yet. Wind risk reads Relatively High and hail risk reads Relatively Low for the county around St. John, exactly the two stresses a panel's ASTM rating is supposed to answer.
Google Maps ratings checked · How we rank
Storm ratings on file for Lake County
On FEMA's National Risk Index, wind risk in Lake County is Relatively High and hail risk is Relatively Low.
Both are exactly the two stresses vinyl siding sold near St. John is tested against before a product can carry ASTM certification.
A Relatively High wind rating is one more reason to ask what wind-load class your installer is actually specifying.
- Strong wind
- Relatively High
- Hail
- Relatively Low
- Hurricane
- Very Low
- Wildfire
- Relatively Low
Data: FEMA, National Risk Index for Natural Hazards - County-level table, v1.20 (v1.20, December 2025).
Vinyl siding installers near St. John, by Google rating
A single five-star review counts for less here than a few hundred reviews averaging 4.8, since the order below blends the star count with how many people left one. Nothing about that order checks a license, so ask to see one yourself before you sign.
Eenigenburg Exteriors
Siding contractor
- Google rating
- Reviews
- 427
- Area
- Cedar Lake 46303
Total Roofing and Construction Services, Inc.
Siding contractor
- Google rating
- Reviews
- 410
- Area
- Schererville 46375
Reliance Roof Troop
Siding contractor
- Google rating
- Reviews
- 276
- Area
- Schererville 46375
Lesniak Roofing of Crown Point
Siding contractor
- Google rating
- Reviews
- 13
- Area
- St John 46373
J & F Chiattello Construction, Inc.
Siding contractor
- Google rating
- Reviews
- 14
- Area
- Dyer 46311
Before you sign, ask about the panel itself
- What thickness, in mils, is this panel, and does it carry an independent ASTM D3679 certification listing?
- Is this standard vinyl or insulated vinyl, and if insulated, what R-value is certified under ASTM D7793?
- What wind-load rating is the product certified for, in miles per hour, and how does that compare to {county}'s wind risk?
- Will the installer leave the manufacturer's specified expansion gap at trim, corners and openings, or nail tight?
- If the color is a dark shade, is it separately certified for color retention?
- Does any wall face reflected sunlight from a neighboring low-E window, and has that been accounted for in the material choice?